Noise Reduction Group Settings |
(Radio Profiles, Audio Settings) |
The purpose of Noise Reduction Group Settings is to predefine a set of value for Noise Reduction Section fields under Microphone / TX Settings Group. When the Group Setting value changed other than "Custom", the value of the fields on that section shall be changed accordingly.
When the group setting is not set to “Custom”, then all fields will become view-only.
The following table lists the selections and definitions for Noise Reduction Group Settings (Radio).
SELECTIONS: |
DEFINITIONS: |
Off |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Off", Wind Noise Reduction Level is "Off", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Radio NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Full Automatic", and Directivity Mode is "On/Adapting". |
Normal |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Normal", Wind Noise Reduction Level is "Normal", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Radio NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Full Automatic", and Directivity Mode is "On/Adapting". |
Aggressive |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Aggressive", Wind Noise Reduction Level is "Normal", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Radio NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Full Automatic", and Directivity Mode is "On/Adapting". |
Extreme |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Extreme_1-sided", Wind Noise Reduction Level is "Normal", PASS Alarm is "Enabled", Noise Reduction Profile Selection is "Radio NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Full Automatic", and Directivity Mode is "On/Adapting". |
Auto |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Auto", Wind Noise Reduction Level is "Normal", and PASS Alarm is "Enabled". Enables the auto-aggressiveness profile of noise reduction.
|
The following table lists the selections and definitions for Noise Reduction Group Settings (Accessory).
SELECTIONS: |
DEFINITIONS: |
Off |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Off", Wind Noise Reduction Level is "Off", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Acc NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Mic 1", and Directivity Mode is "On/Adapting". |
Normal |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Normal", Wind Noise Reduction Level is "Normal", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Acc NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Mic 1", and Directivity Mode is "On/Adapting". |
Aggressive |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Aggressive", Wind Noise Reduction Level is "Normal", PASS Alarm is "Disabled", Noise Reduction Profile Selection is "Acc NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Mic 1", and Directivity Mode is "On/Adapting". |
Extreme |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Extreme_1-sided", Wind Noise Reduction Level is "Normal", PASS Alarm is "Enabled", Noise Reduction Profile Selection is "Acc NR 1", Background Noise Reduction Mode is "On/Applied", Wind Noise Reduction Mode is "On/Active", Source Mode is "Mic 1", and Directivity Mode is "On/Adapting". |
Auto |
The value of the following fields is set to: Custom Noise Reduction is "Disabled", Background Noise Reduction Level is "Auto", Wind Noise Reduction Level is "Normal", and PASS Alarm is "Enabled". Enables the auto-aggressiveness profile of noise reduction.
|
This is an advanced
setting which is only
available in Full View (see Codeplug View).
